Skip to content
BookProNow
Wood Polishing: brushing finish onto a wooden board
Painting25% off30-day warranty included

Wood Polishing

Takes about 5 hr

Wood that has gone dull, patchy or scratched comes back with a proper polish. The crew sands the surface back to bare wood, stains it to the shade you pick, and applies two coats of melamine or PU finish. Before doing the whole piece, they polish a sample panel so you can approve the shade and sheen.

Pricing is per sq ft as shown, on the measured polished surface. Polish and stain are charged at actual. Nearby walls and floors are covered, and the area is cleaned before handover.

Empty cupboards and drawers being polished, remove handles if you want them kept clean, and keep the room ventilated during and after the work.

What's included

  • Polished area measured for the per sq ft price
  • Sanding back to bare wood
  • Staining to the shade you pick
  • Two coats of melamine or PU finish
  • Sample panel polished for your approval
  • Floors and walls nearby covered

What's not included

  • Polish, stain and sealer, charged at actual
  • Repairing broken or rotted wood

How the visit goes

  1. 1

    Measure the surfaces

    The polished area is measured and the price confirmed.

  2. 2

    Sand back

    Old finish is sanded off down to bare wood.

  3. 3

    Sample panel

    A sample is stained and polished for you to approve.

  4. 4

    Stain and two coats

    The full surface is stained and given two coats of finish.

What we need from you

  • Cupboards and drawers emptied
  • Handles removed if you prefer
  • Room ventilation

What a finished job looks like

Example before and after photos. How yours turns out depends on where it starts.

After: Teak main door, sanded back and PU polished
Before: Teak main door, sanded back and PU polished
BeforeAfter
Teak main door, sanded back and PU polished

Questions about this service

Melamine or PU, which should I choose?

PU is tougher and suits doors and tables that get daily use. Melamine is a good value choice for less-used furniture. The crew can advise on your pieces.

Can I see the shade before you start?

Yes. A sample panel is polished first and you approve it.

Does polishing smell?

Yes, for a while. Keep the room ventilated during the work and for some time after.

Reviews

No reviews yet. Be the first to book and review this service.